
Advanced chain lubricant. Specifically formulated to eliminate the most common problem for motorcyclists: "chain whip" or grease splashing onto the rear wheel and clothing.
"High-viscosity, anti-drip formula that resists centrifugal force, keeping the grease on the chain and not on the rim. Hydrophobic Protection: Repels water, salt, and mud, protecting against corrosion even on days of heavy rain. Long-Lasting Adhesion: Reduces the frequency of application; Keeps the chain lubricated for longer under normal and extreme conditions. Zero Stains: Designed not to stain tires or paint, keeping your motorcycle's appearance pristine. Noise Reduction: Eliminates metallic squeaking by reducing friction between links."
SPLASHES ON MOVING PARTS
Lubricate the motorcycle chain, eliminating splashes onto the rear wheel and clothing
Resistance to water, salt, and mud
1. Preparation: Make sure the chain is clean and dry. If it is very dirty, clean it first with our specific Tratauto Chain Cleaner “ref: 810” and let it dry.
2. Shake the container well for 10 seconds before use to mix the components.
3. Precise Application: Place the motorcycle on its center stand. Spray the lubricant directly onto the inside of the chain (the rollers), not onto the outside of the links. Apply a thin, continuous stream while slowly turning the wheel backward. Tip: Avoid spraying directly onto the brake disc or rim.
4. Drying: Leave for 5-10 minutes to allow the solvent to evaporate and the protective layer to set.
5. Excess Cleaning: Gently wipe the outside of the chain with a clean cloth to remove any visible excess. This ensures there is no residue that could attract dust.
Complementary solutions from the same category

Treatment for repairing and improving the steering system.

Lithium-based multi-use protector-lubricant aerosol.

Special formula, high temperature resistant adhesive copper paste and pressures to lubricate, disassemble and protect against corrosion.