FUEL ADDITIVEAvailable
Motorcycles
MotorcyclesMOTORCYCLE CARB CLEANER – 2T and 4T
The specific formula to restore your motorcycle's performance. Carb cleaner is a high-impact product formulated exclusively for motorcycle fuel injection and carburetion systems, instantly dissolving varnish, carbonized rubber, and deposits.
- Reference
- 843654897424
- Container
- Metálico
- Capacity
- 550 ml
- Units
- 12
PreventiveCorrective
What does it do?
"• Power Recovery: Removes dirt that restricts airflow and fuel, restoring immediate throttle response and improving acceleration. • Fuel Savings: By optimizing the air-fuel mixture, you reduce unnecessary fuel consumption and black smoke emissions. • Material Safety: The "Safe-Gel" formula won't corrode or crack the carburetor's rubber gaskets, O-rings, vacuum diaphragms, or plastic components. • Fast Drying: Prevents residue that could affect ignition; it evaporates completely, leaving the passages ready to operate. • Easy Application: Allows cleaning without the need to completely disassemble the carburetor (in many cases), saving time and labor."
SOLUTIONS
JERKING OR HESITATION WHEN ACCELERATING; UNSTABLE IDLE OR STALLING; DIFFICULTY STARTING (ESPECIALLY WHEN COLD); LACK OF POWER ON INCLINES; EXCESSIVE FUEL CONSUMPTION...
When to use?
Deep and safe cleaning of motorcycle fuel injection and carburetion systems without damaging sensitive internal components such as rubber gaskets, vacuum diaphragms, and technical plastics.
Usage Instructions
Preparation: Ensure you work in a well-ventilated area. Turn off the engine and let it cool. If possible, disconnect the battery for safety. Direct Application (No Disassembly):
1. Remove the air filter to access the carburetor body.
2. Connect the included applicator tube to the spray nozzle.
3. Generously spray the product directly into the carburetor intake (where the air enters) and onto the visible passages.
4. Keep the throttle slightly open to allow the liquid to circulate through the internal circuits. Contamination Time: Leave for 5-10 minutes. You will see dirty liquid coming out of the exhaust or air return. Rinse/Dry: Reinstall the air filter and start the motorcycle. Let it idle for a few minutes until you notice the engine has stopped sputtering and is running smoothly.
Warnings
- Gasoline Engines (Injection or Carbureted): Apply the product immediately after reaching operating temperature.
Related Products
Complementary solutions from the same category
DT1000 INJECTOR & GLOW PLUGS UNBLOCKER
Aerosol formulated for unblocking injectors, heaters, sparking plugs and bolts submitted to extreme pressure and temperatures.
CATALYTIC CONVERTER CLEANER
A cutting-edge product for cleaning inside the catalytic converter and other elements that make up the exhaust system.
POWER DPF CLEANER AND REGENERATOR
Cutting-edge product formulated for cleaning the particulate filter.