Tratauto
HomeProductsAbout UsDownloadsContact
HomeProductsAbout UsDownloadsContact
Tratauto

Professional engine chemical treatments.

Products

  • COOLING SYSTEM
  • ENGINE TREATMENTS
  • SPECIAL LUBRICANTS
  • FUEL ADDITIVE
  • CLEANING & OTHERS
  • AIR CONDITIONING

Company

  • Home
  • About Us
  • Downloads
  • Contact

Contact

  • C/ Platino 58

    28770 Colmenar Viejo

    Madrid, España

  • (+34) 91 847 33 13
  • info@tratauto.com

© 2026 Tratauto. All rights reserved.

CookiesPrivacyTermsLegal Notice
CHAIN CLEANER - Image 1
CLEANING & OTHERS
Available
|
MotorcyclesMotorcycles

CHAIN CLEANER

Product to remove ingrained dirt, old grease, mud, and fuel residue that accumulates on the rollers and links of your chain. Our advanced formula with high-evaporation solvents.

Reference
843654897810
Container
Metálico
Capacity
300 ml
Units
15
PreventiveCorrective

What does it do?

"• Removes grime: Eliminates the black "mud" layer that acts like sandpaper, prematurely wearing down your sprockets and chain. • Dries Quickly: Leaves no greasy or sticky residue; evaporates instantly to leave the chain ready for lubrication. • Protects: Contains additives that prevent rust and corrosion from moisture."

SOLUTIONS

CLEAN: REMOVES OLD AND STICKY GREASE, MUD AND DUST, REMNANTS OF PREVIOUS LUBRICANTS, CARBON DEBRIS AND METALLIC PARTICLES...

When to use?

Prepare the chain for lubrication by removing mud, old greases and metallic residues to prevent wear of the transmission.

Usage Instructions

• Preparation: Make sure the motorcycle is on its center stand and the engine is cold. If the chain is very dirty, you can manually rotate the rear wheel a few times to expose all sides of the links.

1. Shake the spray well before using.

2. Spray generously along the entire length of the chain, making sure to cover both the inner (rollers) and outer surfaces.

3. Tip: For maximum effectiveness, apply while slowly rotating the wheel so the liquid penetrates every link.

4. Leave for 30-60 seconds.

5. Rubbing (Optional but recommended): Use a stiff-bristled (non-metallic) brush to gently scrub the links and remove dirt from hard-to-reach areas.

6. Rinse/Dry: If you used too much product, you can wipe it with a clean, absorbent cloth. The product dries quickly on its own. Do not use water after applying, as this could cause rust.

7. Important Lubrication: Once the chain is completely clean and dry, immediately apply Tratauto Anti-Drip Grease (Ref: 410). A clean chain absorbs the lubricant better.

Warnings

  • For Outdoor Use Only.
  • Avoid inhaling the fumes directly.
  • Never apply lubricant to a dirty chain.
  • Clean and lubricate your chain every 500 to 1000 km or after every long ride in the rain or in dusty conditions.

Related Products

Complementary solutions from the same category

View All
ALL IN 1 - SUPER MULTIUSE
Passenger Cars
Motorcycles
Fleets

ALL IN 1 - SUPER MULTIUSE

Cutting edge, multi-use product with new, improved formula. Can be sprayed onto any angle, evaporating quickly without leaving a mark.

LIQUID TIRE CHAIN
Passenger Cars
Motorcycles
Fleets

LIQUID TIRE CHAIN

Formula to improve adhesion in ice and snow

CONTACT & ELECTRICAL CLEANER
Passenger Cars
Motorcycles
Fleets

CONTACT & ELECTRICAL CLEANER

A dielectric contact aerosol cleaner with special features. Universal use. A basic tools for garages, industry, nautical...