DESCRIPTION

Cutting-edge product formulated for cleaning the particulate filter.  

WHAT DOES IT DO?

Combined with the post-injection (regeneration) of the engine process, it raises and maintains the temperature of exhaust gases, descaling and incinerating impurities and residues from the filter that will then be expelled through the exhaust pipe.
 
WHEN SHOULD IT BE USED? - FOR:

• Eliminating all types of impurities and residues with a high level of saturation from the particulate filter
• Re-establishing a correct air/fuel relation  
• Vehicles that are driven short distances in towns and cities
• Reducing the relation of polluting gases evaluated in the Vehicle Inspection Test.

INSTRUCTIONS FOR USE

1. Remove the fuel tank cap 
2. Empty the contents of the container into the tank with a low amount of fuel
3. Replace the cap of the tank
4. Start the engine and leave it idle for 5-8 minutes
5. Drive for about 20 Km or more, keeping the revolutions between 2,500-3,000 r.p.m.

• Must be performed by a professional expert      

WARNING REGARDING USE

To correctly assess the filter, diagnose the percentage of saturation before and after using the product. Effective in the following systems: Common rail, CDTI, CDI, CDTDI, TDCI, CRDI, HDI, JTD, GDI, DCAT, DTI, IDE...

COMPATIBLE

479 Catalytic Converter Cleaner

478 Diesel Jet Clean

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

Clean and service the whole fuel circuit:  

1 year   

Add the product as a preventive measure:    

2000 hours