DESCRIPTION

State-of-the-art formula that significantly re-establishes engine compression. 

 

WHAT DOES IT DO?

It quickly and efficiently reduces the emission of polluting gases due to oil combustion assessed by the Vehicle Inspection Test. It reduces the tolerances between the cylinder liner and piston. 

It does not alter the colour, density and volume of the oil.

 

WHEN SHOULD IT BE USED?

Recommended uses:

• As a tool to be used before the Vehicle Inspection Test: It reduces the emissions caused by oil combustion
• It re-establishes the compression in engines with a high oil consumption
• It prevents the saturation of catalytic converters and the particulate filter 
• It reduces the internal engine noises.
• It does not affect the correct performance of catalytic converters or particulate filters.

 

INSTRUCTIONS FOR USE

1. With the engine switched off, remove the oil filler cap 
2. Add the contents of the product after changing the oil
3. Replace the engine oil filler cap.

 

WARNING REGARDING USE

Apply preferably when changing the oil

COMPATIBLE

Compatible with all engines and oils.

454 MT2000 Synthetic Metal Treatment

447 Oil Stop Leak

089 Smoke Eliminator

577 Motor Flush

157 Hydraulic Valves

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole lubrication system:   

2 years     -   30,000 Km    

 

Add the product as a preventive measure:     

1 year     -   15,000 Km

 

For extra protection, combine with MT2000 Synthetic Metal Treatment.