DESCRIPTION

A product used for re-establishing the good performance of hydraulic valves in all types of engines.

 

WHAT DOES IT DO?

Cleans and eliminates remains of oil and carbon deposit.

It guarantees the hydraulic valves (valve tappets) are loaded correctly.

It does not change the colour, density and volume of the oil.

Does not damage gaskets or oil seals.

 

WHEN SHOULD IT BE USED? FOR:

• Effectively reducing the noise of hydraulic valves (valve tappets) with a cold engine 
• Dissolving dirt, residues and varnishes inside the lubrication channels
• Engines with excessive wear or mileage
• It does not affect the correct performance of catalytic converters or particulate filters.

 

INSTRUCTIONS FOR USE

1. With the engine switched off, remove the oil filler cap 

1. Add the contents of the product   
2. Replace the oil filler cap.

 

WARNING REGARDING USE

Acts progressively, which means effective results are obtained after 500 km

Apply preferably when changing the oil.

 COMPATIBLE

Compatible with all engines and oils.

454 MT2000 Synthetic Metal Treatment

447 Oil Stop Leak

089 Smoke Eliminator

577 Motor Flush

448 Compression Motor

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole lubrication system:   

2 years     -   45,000 Km    

 

Add the product as a preventive measure:     

1 year     -   30,000 Km

 

For extra protection, combine with MT2000 Synthetic Metal Treatment.