DESCRIPTION

Treatment formulated for eliminating varnishes, sludge and solid remains from all the internal engine parts.

 

WHAT DOES IT DO?

It contains special additives that treat, dissolve and clean varnishes, deposits and residues in only 5 minutes. 

Does not damage gaskets or oil seals.

 

WHEN SHOULD IT BE USED? FOR:

• Eliminating and cleaning all type of residues and sediment from combustion
• Increasing the air-tightness of cylinders
• Restoring compression losses  
• Cleaning carbonised segments   
• Engines with high mileage 
• Engines that were not serviced when they reached the recommended mileage or time  

  

INSTRUCTIONS FOR USE

1. Start the engine and wait until it reaches running temperature
2. Switch off the engine and remove the oil filler cap 
3. Add the contents of the product
4. Replace the oil filler cap
5. Switch on the engine and leave it idle for a MAXIMUM OF 5 MINUTES
6. Switch off the engine and extract the oil through the lower crankcase.

• Must be performed by a professional expert      

 WARNING REGARDING USE

For turbo engines that need a replacement due to breakage we recommend you carry out the cleaning process twice.

 

COMPATIBLE

Compatible with all engines and oils.

560 MT2000 Synthetic Metal Treatment

561 Oil Stop Leak

090 Smoke Eliminator

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole lubrication system:  

1 year   

 

Add the product as a preventive measure:    

4000 hours

 

For extra protection, combine with MT2000 Synthetic Metal Treatment.