DESCRIPTION

A synthetic-based treatment formulated to reduce smoke emissions (bluey-white) and lower oil consumption.

 

WHAT DOES IT DO?

It forms a viscous layer filling all the spaces between worn components or with excessive tolerance, such as cylinder liners and pistons.

It does not alter the colour, density and volume of the oil.

 

WHEN SHOULD IT BE USED? FOR:

• Reducing the smoke emissions caused by excessive oil combustion
• Repaired engines or which consume a great deal of oil
• Preventing the saturation of the particulate filter in engines that consume oil
• Increasing the engine compression ratio
• Reducing internal engine noises
• Vehicles with problems regarding the Vehicle Inspection Test caused by these cases.
• It does not affect the correct performance of catalytic converters or particulate filters.

 

INSTRUCTIONS FOR USE

1. With the engine switched off, remove the oil filler cap 
2. Apply the contents of the product after changing the oil
3. Replace the engine oil filler cap.

 WARNING REGARDING USE

Apply preferably when changing the oil.

 

COMPATIBLE

Compatible with all engines and oils.

560 MT2000 Synthetic Metal Treatment

561 Oil Stop Leak

430 Motor Flush

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole lubrication system:  

1 year   

 

Add the product as a preventive measure:    

4000 hours

 

For extra protection, combine with MT2000 Synthetic Metal Treatment.