DESCRIPTION

Improved formula with a ceramic-metal base for permanently sealing leaks in the cooling system. 

 

WHAT DOES IT DO?

Seals any crack (2 mm) by means of temperature and pressure. Suitable for radiators, cylinder head and block.

 

WHEN SHOULD IT BE USED? FOR:

• PERMANENTLY sealing leaks in radiators made of copper, brass, aluminium and plastic 
• Sealing microcracks in cylinder heads made of cast iron, steel and aluminium
• Sealing leaks in heating radiators
• Reducing the consumption of anti-freeze lost by evaporation in engines that work at high temperatures 
• Sealing critical points of the radiator, such as: plastic-metal joints, creases and vertices.

 

INSTRUCTIONS FOR USE

1. It is IMPORTANT to shake the container until the components have mixed together perfectly 
2. With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator 
3. Add the contents of the product and replace the cap on the expansion tank/radiator
4. Start the engine and wait until it has heated to running temperature 
5. Check the leak has been sealed properly.

• Must be performed by a professional expert      

WARNING REGARDING USE

Make sure the circuit is clean.

 

COMPATIBLE

Compatible with any type of anti-freeze / coolant.

522 Radiator Stop Leak

546 Radiator Flush

737 Cooling System Degreaser

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole cooling system:   

1 year

 

Add the product as a preventive measure:  Not Present