DESCRIPTION

A highly concentrated product, formulated for cleaning all type of residues (except oil) incrusted in the radiator and cooling system.

 

WHAT DOES IT DO?

State-of-the-art components that remove limescale, stir and clean dirt in all types of radiators and elements that make up a cooling system. 

 

WHEN SHOULD IT BE USED? FOR:

• Stirring, cleaning, dissolving and eliminating all kinds of sediment
• Re-establishing the proper temperature exchange between the radiator/engine and components.

 

INSTRUCTIONS FOR USE

1. With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator 
2. Add the contents of the product  
3. Replace the cap on the expansion tank/radiator 
4. Start the engine and wait until it has heated to running temperature 
5. Leave the engine idle for 30 minutes
6. Switch off the engine and wait until the temperature and pressure in the circuit have reduced
7. Empty the circuit and rinse with abundant water until the last residues have been eliminated
8. Fill the circuit with anti-freeze /coolant with the proportions recommended by the manufacturer
9. Replace the cap on the expansion tank/radiator.  

• Must be performed by a professional expert   

 WARNING REGARDING USE

Because it does not contain abrasive elements, it can be used in any type of engine without any risk of damage.

 

COMPATIBLE

Compatible with any type of anti-freeze / coolant.

522 Radiator Stop Leak

737 Cooling System Degreaser

508 CER-MET Permanent Block & Radiator Seal

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole cooling system:   

1 year

 

Add the product as a preventive measure:    

2000 hours