DESCRIPTION

Formulated for cleaning and eliminating remains of oil and grease from the whole cooling system.

 

WHAT DOES IT DO?

Its main purpose is to eliminate the oil emulsion in water, in order to efficiently extract residues of oil. 

 

WHEN SHOULD IT BE USED? - FOR:

• Eliminating all traces of oil from the cooling system after a breakage in the cooler or cylinder head gasket
• For stirring and cleaning sediment from the cooling system
• Re-establishing the proper temperature exchange between the radiator/engine and components 
• Suitable for use in radiator cleaning machines.

 

INSTRUCTIONS FOR USE

1. If there is a very high concentration of oil, previously evacuate the circuit and rinse with water.
2. With the engine at room temperature and without pressure, remove the cap of the cooling system’s expansion tank/radiator 
3. Add the contents of the product   
4. Replace the cap on the expansion tank/radiator  
5. Start the engine and wait until it has heated to running temperature 
6. Leave the engine idle for 30 minutes and check that the temperature does not exceed the normal range of performance
7. Switch off the engine and wait until the temperature and pressure in the circuit have reduced
8. Empty the circuit and rinse with abundant water until the last residues have been eliminated
9. Fill the circuit with anti-freeze /coolant with the proportions given by the manufacturer 
10. Replace the cap on the expansion tank/radiator.   

• Must be performed by a professional expert 

WARNING REGARDING USE

Because it does not contain abrasive elements, it can be used in any type of engine without any risk of damage

In very contaminated circuits, repeat the process.

 

COMPATIBLE

Compatible with any type of anti-freeze / coolant.

522 Radiator Stop Leak

546 Radiator Flush

508 CER-MET Permanent Block & Radiator Seal 

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole cooling system:   

1 year

 

Add the product as a preventive measure:    

Not Present