DESCRIPTION

Aerosol formulated for eliminating residue and sediment from inside the admission system. 

 

WHAT DOES IT DO?

Its powerful action eliminates and cleans remains of varnish, oil, carbon dust and grease in:  Carburettor and injection engines - Diesel or petrol engines

 

WHEN SHOULD IT BE USED? FOR:

• Cleaning residue and sediment in admission collectors, butterfly valves, turbocompressors, oxygen sensors…  
• Re-establishing the correct engine acceleration and idling patterns
• Using in either assembled or dismantled parts, such as EGR valves and lambda probes covered in carbon or oil
• Cleaning the crankcase ventilation elements.  

INSTRUCTIONS FOR USE

1. Dismantle all the conducts and elements until you reach to the admission collector/butterfly valve
2. Start the engine and let it run until it reaches operational temperature
3. Maintain the engine at a constant rate of 1,5000 r.p.m.
4. Spray for 3 seconds keeping a distance of between 20 and 30 cm and check that the engine does not accelerate in an uncontrolled way or produce noise caused by pre-ignition (turbo engines)
5. After checking the engine is behaving normally, start spraying for 5 to 10 seconds and alternate each time you spray with 3 accelerations. Keep a check on the engine response 
6. After the process has finished, leave the engine switched on for 5-8 to balance the values of the blend
7. Switch off the engine and assemble the necessary elements.

 WARNING REGARDING USE

Injection or carburettor petrol engines: apply the product directly after reaching operational temperature

Diesel engines: if necessary, disconnect the EGR valve.

 

COMPATIBLE

500 Particle Filter Cleaner, 027 Catalytic Converter Cleaner, 461 Diesel Jet Clean

485 Injector Cleaner, 467 ITV Diesel, 468 ITV Petrol, 427 DT1000 Injector & Glow Plugs Unblocker, 428 Starting Fluid

 

RECOMMENDATIONS AND MAINTENANCE

Correct maintenance prevents expensive repairs. For this reason our Technical Department recommends:

 

Clean and service the whole admission/exhaust circuit:      

2 years     -   30,000 Km    

 

Add the product as a preventive measure:     

1 year     -   15,000 Km